BMS Screen On Arduino

By |September 1st, 2015|COMPONENT BUILD|0 Comments

Have the little screen connected to the Arduino and it is all working. Have finalised the design of the display graphics and implemented the 3 display pages I am going to use.

I also mounted the screen in its optional bezel for wall mounting.

Page 1 shows the bank voltage and the charge and load current, using 2 separate shunts measuring the incoming solar charge  and the outgoing load.
The image below shows this page on the screen with the Arduino connected. The second and third page have minor changes.

Page 2 shows the cell monitor and a couple of additional buttons and […]